Locate leaks and illegal connections
Sewer Smoke Testing in Kenilworth, NJ
Sabra Drain & Sewer provides smoke testing in Kenilworth and across nine New Jersey counties to locate leaks and illegal connections in sewer systems.
Live dispatcherUpfront optionsFamily-owned, 40+ years
Service overview
How Smoke Testing Works
Smoke testing introduces non-toxic smoke into a sewer system under low pressure. Wherever the smoke escapes, it reveals a defect: cracked pipe, open or broken cleanouts, failed joints, dry traps or connections that should not be tied into the line.
Smoke testing is useful for finding sewer gas odors, leaks and improper connections such as roof drains or sump pumps tied into sanitary lines. It complements camera inspection and leak detection, which have been part of our work for decades.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How It Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Prepare
We access the system and prepare it for testing.
Introduce Smoke
Non-toxic smoke is blown into the line.
Locate Defects
Escape points are identified and repairs are recommended.
Definition
Sewer Smoke Testing in Kenilworth, NJ
Sewer smoke testing in Kenilworth, NJ is a diagnostic method that blows non-toxic smoke into a sewer or drain system to reveal where it leaks. Wherever the smoke escapes, from a cracked pipe, an open cleanout, a dry trap or an improper connection, shows a defect that would otherwise be hidden.
Smoke testing is especially good at finding sewer gas odors, broken pipes under slabs and lawns, and connections that should not be tied into the sanitary sewer, such as roof leaders and sump pumps.
What it finds
What Smoke Testing Can Find
- Cracked or broken sewer pipe
- Missing or damaged cleanout caps
- Dry floor drain and fixture traps
- Failed vent pipes and roof vent connections
- Roof drains, downspouts or sump pumps illegally connected to the sanitary sewer
- Leaks behind walls and under floors that cause sewer gas odors
Process
How a Smoke Test Works
- Notification. Occupants are told the test is coming so smoke is not mistaken for fire.
- Preparation. Traps are filled and openings identified.
- Smoke introduction. A blower forces non-toxic smoke into the system.
- Observation. We watch for smoke inside the building and outside on the property.
- Report. Escape points are documented with repair recommendations.
Odors
Tracking Down Sewer Gas Odors
Sewer gas smells like rotten eggs and usually means sewer air is escaping where it should not. Common causes are dry traps, failed wax rings under toilets, cracked vent pipes and broken drain lines. Smoke testing pinpoints the source when visual checks cannot.
With other diagnostics
Smoke Testing and Camera Inspection
Smoke testing shows where air escapes; camera inspection shows the inside condition of the pipe. Used together, they locate leaks precisely so repairs target the right spot.
Service area
Smoke Testing Across Nine New Jersey Counties
Sabra Drain & Sewer provides sewer smoke testing in Kenilworth from our base at 307 S Michigan Ave, Kenilworth, NJ 07033, to homeowners and businesses throughout Essex, Union, Hudson, Bergen, Middlesex, Monmouth, Passaic, Morris and Ocean counties. We are family-owned with over 40 years of experience, not a franchise, and available 24/7 for emergencies. Call 973-715-9422.
More questions
Smoke Testing FAQs
Is sewer smoke testing safe?
Yes. The smoke is non-toxic and does not stain. Occupants are notified in advance.
What does sewer gas smell like?
A rotten-egg odor, often from dry traps, failed toilet seals or cracked drain and vent pipes.
Can smoke testing find illegal connections?
Yes. Smoke coming from downspouts, roof drains or sump discharges shows they are tied into the sewer.
How long does a smoke test take?
A typical building test is completed in a single visit.
Why would a town smoke test my neighborhood?
Municipalities smoke test to find stormwater entering sanitary sewers and leaking pipes.
Is sewer smoke testing safe?
Yes. The smoke used is non-toxic and leaves no residue. It simply reveals where the system is leaking.
What can smoke testing find?
Leaks, cracked pipes, open cleanouts, dry traps and illegal connections in sewer systems.
Related services
Related Services
Ready when you are
Need Sewer Smoke Testing?
Family-owned, 40+ years of experience and 24/7 emergency service. Call Sabra Drain & Sewer today.
Talk with the local team
Request Smoke Testing
Call 973-715-9422 or email sabrasewer@gmail.com. Available 24/7 for emergencies.